Configuration
35
Siemens Building Technologies
SISTORE AX4_EN.doc
Fire & Security Products
09.2004
3.7.3
Time-Lapse Recording Schedule
Fig. 46
Time-Lapse Recording Schedule screen.
You can program the DVR to record only during certain times based on time, day
of the week, and holidays. The smallest time segment you can use is 30 minutes.
A blue rectangle indicates the DVR is set to record during those 30 minutes. When
there is no rectangle, the DVR will not record during those 30 minutes.
There are several ways to set recording times:
l
You can highlight an individual block and toggle it On or Off by pressing the
button.
l
You can change a 30-minute segment for all days by placing the cursor on the
time line and pressing the
button to toggle the segment On or Off.
l
You can change an entire day by placing the cursor on the day of the week and
pressing the
button to toggle the day On or Off.
l
You can change the entire calendar by placing the cursor in the upper left -hand
box (above “S” and to the left of the time line) and pressing the
button to
toggle the entire calendar On and Off.
NOTE:
The Holiday (H) schedule applies to the dates you established as holidays when setting Date/Time.
You can save your changes by highlighting OK and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
