Configuration
52
Siemens Building Technologies
SISTORE AX4_EN.doc
Fire & Security Products
09.2004
3.10.5 Password Setup Screen
An Administrator password is required to turn the system off, enter the setup
screen, load default setups, clear all data, change system date and time and
change the Administrator password. A User password is required to enter
playback, fast forward playback and fast backward playback modes from live
monitoring mode, and enter the search menu screen in live monitoring mode.
Highlight Password in the Main menu and press to enter the Password screen.
Fig. 67
Password setup screen.
Highlight the box beside User and press the
button to toggle between On and
Off. If the password is set to On, you will be asked to enter the current password
so that you can turn it Off. If the password is set to Off, you will be asked to enter
the new password and to confirm it before it will be turned on.
The Administrator password cannot be turned On and Off. You can change the
Administrator password by first entering the current password, entering a new
password and finally confirming the new password.
To change the password, highlight the Password box and press the
button. A
window appears asking you to enter the current password. If you enter the correct
password, another window appears asking you to enter a new password using the
camera buttons. After you press the
button, another screen appears asking you
to confirm the new password.
NOTE:
The Admin and User passwords are composed of up to eight digits using the camera buttons. The
default Admin password is
4321
.
CAUTION:
Write down the new password and save it in a secure place. If the password is forgotten, the unit
must be reset using the
Factory Reset Button
and all data settings will be lost.
To lock front panel buttons, highlight Key Lock On and press the
button. Once
the buttons are locked, pressing any front panel button will cause a password
screen to display. You will need to enter the correct password to unlock the keys.
The Key Lock password is
4321
. The Administrator password also can be used to
unlock the keys.
You can save your changes by highlighting OK and pressing
button. Selecting
Cancel exits the screen without saving the changes.
