Siemens SISTORE AX4 User Manual Download Page 45

Page: 45 / 70

Configuration

Siemens Building Technologies

SISTORE AX4_EN.doc

Fire & Security Products

09.2004

3.9

Display Setup

Highlight the OSD, Main Monitoring in the Main menu, and press the

button to

set up the on-screen display or camera display on the main monitor.

3.9.1

OSD (On-Screen Display) Setup

The DVR can be set up to display Date, Time, Title and Status on screen. Each
feature can be turned on or off, and you can adjust the margins.

Fig. 60

OSD Setup screen.

Highlight the box beside Date and press the

button to toggle the date display

On and Off.
Highlight the box beside Time and press the

button to toggle the time display

On and Off.
Highlight the box beside Title and press the

button to toggle the camera title

display On and Off.
Highlight the box beside Status and press the

button to toggle status display On

and Off.
Highlight the box beside Left/Right Margin and press the

button to adjust the left

and right margins. The margins can be set from 1 to 24.
Highlight the box beside Top/Bottom Margin and press the

button to adjust the

top and bottom margins. The margins can be set from 1 to 24.

Summary of Contents for SISTORE AX4







































































Search results

Summary of Contents for SISTORE AX4

Reviews:

Related manuals for SISTORE AX4

Brands by name

Popular brands

Siemens SISTORE AX4, User Manual

Search results

Summary of Contents for SISTORE AX4

Reviews:

Related manuals for SISTORE AX4

Brands by name

Popular brands