Siemens SISTORE AX4 User Manual Download Page 48

Page: 48 / 70

Configuration

Siemens Building Technologies

SISTORE AX4_EN.doc

Fire & Security Products

09.2004

3.10.1 LAN Setup Screen

Fig. 63

LAN Setup screen.

Highlight the box beside Use dynamic IP Configuration (DHCP) and press the

button to toggle between On and Off.

NOTE:

When set to

, the IP Address, Gateway and Subnet Mask will be set automatically, so you cannot

change the LAN settings.

NOTE:

When you use the DHCP, the IP address of the DVR might be changed whenever turning the DVR on.
You can check the current IP address of the DVR in the System Information screen.

Change the numbers by highlighting them and using the arrow buttons to increase
or decrease the numbers.

NOTE:

You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network
administrator.

The factory default LAN settings are:

IP Address:

192.168.1.129

Gateway:

192.168.1.254

Subnet Mask: 255.255.255.0

You can save your changes and return to the Network Setup screen by highlighting
OK and pressing the

button. Selecting Cancel exits the screen without saving

the changes.

Summary of Contents for SISTORE AX4







































































Search results

Summary of Contents for SISTORE AX4

Reviews:

Related manuals for SISTORE AX4

Brands by name

Popular brands

Siemens SISTORE AX4, User Manual

Search results

Summary of Contents for SISTORE AX4

Reviews:

Related manuals for SISTORE AX4

Brands by name

Popular brands