Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual Download

Page: 72 / 222

Figure 3-20 Set PG/PC interface

The settings for the network bridge have now been completed.

3.3.3

HMI or ES via PROFINET

Networking via PROFINET

PROFINET is the innovative and open Industrial Ethernet standard (EN 61158) for industrial

automation. With PROFINET, devices can be linked up from the field level through to the

management level.
With PROFINET, an external HMI or ES can also be integrated into the network and data can

be exchanged directly with the SIMOTION P320-4 device.

Description
3.3 HMI and SIMOTION SCOUT

SIMOTION P320-4 E / P320-4 S

Commissioning and Hardware Installation Manual, 11/2016

Summary of Contents for SIMOTION P320-4 E































































































































































































































Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands

Siemens SIMOTION P320-4 E, Commissioning And Hardware Installation Manual

Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands