Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual Download

Page: 125 / 222

Options menu

Options

Description

Reset to factory default

Restore the factory default.
This will delete the following data:
● The non-volatile SIMOTION data (retain data) in the SIMOTION

device

● The backup of the non-volatile SIMOTION data on the external

CFast card (PMEMORY.XML/PMEMORY.BAK)

● The user data from the "Volatile SIMOTION data" area (RAM) and

on the external CFast card (ROM)

● The communication configuration (IP and DP parameters) on the

external CFast card is set to the factory settings.

The licenses on the CFast card are retained.

Note
Station Configurator settings
Settings made with the Station Configurator are reset to the default values at the time of delivery

as well.

Further information
can be found in Section Defined states > Restore the factory settings using SIMOTION P

State (Page 169)

Info menu

Info

Description

Hardware Version

Display of the hardware information.

Software Version

Display of the software versions.

Info about SIMOTION P State

Display of the SIMOTION P version.

Note
The versions in the Info menu only become visible after the Windows power-up after the

SIMOTION P320-4 has been started once.

Operator Control (hardware)

8.1 SIMOTION P state application

SIMOTION P320-4 E / P320-4 S

Commissioning and Hardware Installation Manual, 11/2016

125

Summary of Contents for SIMOTION P320-4 E































































































































































































































Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands

Siemens SIMOTION P320-4 E, Commissioning And Hardware Installation Manual

Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands