Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual Download Page 63

Page: 63 / 222

Control Panel > All Control Panel Items > System > Device Manager.
1. Select the Network adapters in the dialog box below the "SIMOTION PC".

The available network connections are shown here.

Figure 3-8

Opening the Device Manager

2. Install the Microsoft Loopback Adapter via the Device Manager.
3. To do this, select the menu Action > Add legacy hardware.

The Add Hardware Wizard then opens.

Description

3.3 HMI and SIMOTION SCOUT

SIMOTION P320-4 E / P320-4 S

Commissioning and Hardware Installation Manual, 11/2016

Summary of Contents for SIMOTION P320-4 E































































































































































































































Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands

Siemens SIMOTION P320-4 E, Commissioning And Hardware Installation Manual

Search results

Summary of Contents for SIMOTION P320-4 E

Reviews:

Related manuals for SIMOTION P320-4 E

Brands by name

Popular brands