Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual Download Page 73

Page: 73 / 193

5 Display / WBM Configuration

IE/AS

−

INTERFACE LINK PN IO

as of hardware version 1, as of firmware version V2.0

Release 08/2018

C79000

−

G8976

−

C216

−

5.2.9.5

Time Synchronization

To use this service, the being used on the relevant server must be opened. The
default port is port 123.

WBM: “Time Synchronization” tab

On this page, you can set the method for time synchronization, if you intend to use
it.

The time is used for time stamping of the diagnostic events.

Parameter

Function

Current system

time

Here, either the time since the last restart or the current time is displayed.
If no time is received, “Not synchronized” is also displayed.

Enable time client

Enables/disables the time function.

Summary of Contents for SIMATIC NET IE/AS-INTERFACE LINK PN IO


































































































































































































Search results

Summary of Contents for SIMATIC NET IE/AS-INTERFACE LINK PN IO

Reviews:

Related manuals for SIMATIC NET IE/AS-INTERFACE LINK PN IO

Brands by name

Popular brands

Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO, Manual

Search results

Summary of Contents for SIMATIC NET IE/AS-INTERFACE LINK PN IO

Reviews:

Related manuals for SIMATIC NET IE/AS-INTERFACE LINK PN IO

Brands by name

Popular brands