5
IE/AS
−
INTERFACE LINK PN IO
as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000
−
G8976
−
C216
−
03
Preface
Purpose of the Manual
This manual supports you when using the
IE/AS-INTERFACE LINK PN IO
module.
The product name is also shortened to
IE/AS-i LINK
in the manual. It
contains information about how PROFINET IO controllers can address AS-i
actuators and AS-i sensors via this module.
Validity of the Manual
This manual is valid for the IE/AS-INTERFACE LINK PN IO module as of hardware
version 1 and as of firmware version V2.0 and the STEP 7 configuration software
as of V5.4 SP3 / NCM PC as of V5.4 SP3.
What’s new?
This issue of the manual includes several corrections.
We recommend the following procedure
... If you want an overall picture of the AS-Interface:
−
First read the ‘AS-Interface Introduction and Basic Information’ manual (not
part of this documentation package). This contains general information
about the
AS-Interface
, abbreviated to
AS-i
in the following chapters.
... If you want to set up an AS-i system and include the IE/AS-i LINK in it:
−
You will find the information you require about connecting and operating the
IE/AS-i LINK in Chapter 1 and 3.
... If you want to know how to operate the IE/AS-i LINK from the point of view of
the PROFINET IO
controller:
−
−
−
Chapter 8 explains the data record interface.
Requirements
To understand this manual, you require the following:
S
A working knowledge of PROFINET IO
S
Knowledge of the manual ’AS-Interface Introduction and Basic Information’
