Siemens FN2001-A1 Product Data Download Page 20

Page: 20 / 302

Safety
Standards and directives complied with

20
Building Technologies

008837_q_en_--

Fire Safety

14.05.2012

Disregard of the safety regulations

Before they are delivered, Siemens products are tested to ensure they function

correctly when used properly. Siemens disclaims all liability for damage or injuries

caused by the incorrect application of the instructions or the disregard of danger

warnings contained in the documentation. This applies in particular to the following

damage:

Personal injuries or damage to property caused by improper use and incorrect

application

Personal injuries or damage to property caused by disregarding safety

instructions in the documentation or on the product

Personal injury or damage to property caused by poor maintenance or lack of

maintenance

2.3

Standards and directives complied with

A list of the standards and directives complied with is available from your Siemens

contact.

2.3.1

CPD conformity and firmware version

In order to satisfy Directive 89/106/EEC (the Construction Products Directive –

CPD), the firmware of a newly installed fire detection installation must be current

market package version MP2.1 or higher.

NOTICE

Firmware version of a newly installed fire detection installation not updated
No CPD conformity

Compare the firmware version of a newly installed fire detection installation

with the firmware version MP2.1.

Update the firmware if necessary.

Summary of Contents for FN2001-A1















































































































































































































































































































Search results

Summary of Contents for FN2001-A1

Reviews:

Related manuals for FN2001-A1

Brands by name

Popular brands

Siemens FN2001-A1, Product Data

Search results

Summary of Contents for FN2001-A1

Reviews:

Related manuals for FN2001-A1

Brands by name

Popular brands