Siemens FN2001-A1, Product Data

Page: 297 / 302

RT interface FCI2006-C1 [CH]
48
Indicators
297
Building Technologies 008837_q_en_--
Fire Safety 14.05.2012
RT interface Cable tree 4 loop periphery board 2 loops periphery board
12 Fault White 1 (+ 2) X7-5 FAU_COM X7-5 FAU_COM
13 K1 Black 2 -- -- -- --
14 K1 Brown 2 + 3 -- -- -- --
15 K2 Green 2 -- -- -- --
16 K2 -- 3 -- -- -- --
17 K3 Gray/pink 2 -- -- -- --
18 K3 -- 3 -- -- -- --
19 K4 -- -- -- -- -- --
20 K4 -- 3 -- -- -- --
Cable no.:
Cable 1 to periphery board, control cable VDE LI-CY 0.34 mm
2
, 14-pin, length
560 mm, included in cable set
Cable 2 to RT device, control cable 14-pin VDE LI-CY 0.34 mm
2
, length
700 mm, included in cable set
Cable 3 = loop made from wire jumpers 3 x 0.22 mm
2
x 40 mm
48.4 Indicators
LED Color Function Condition Meaning
H1-1 Red Relay 1 Off Quiescent condition, relay inactive
On Relay activated
H1-2 Red Relay 2 Off Quiescent condition, relay inactive
On Relay activated
H2-1 Red Relay 3 Off Quiescent condition, relay inactive
On Relay activated
H2-2 Red Relay 4 Off Quiescent condition, relay inactive
On Relay activated
H3 Yellow Test Off Quiescent condition
On Test mode active (key S1 pressed)
48.5 Adjustment elements
The switching contacts of the relays K1…K4 and the 'Alarm' and 'Fault' test
contacts must be configured as 'normally open' (NO) or 'normally closed' (NC). The
application-specific configuration is made by inserting a wire jumper (0
resistance) between the corresponding solder pins.
The following figure shows a configuration example using relay K1.
NC
NO
X3
Y3
K1
13
14