4.3 Choosing the functions
Refer to the list below to set the functions of the application accordingly. Some of
the functions may require certain hardware (peripheral devices).
Control functions
Control function
BACnet object
Selection
Note
Ventilation control
STR_VIEW, 402
Ventilation control 21y, air
volume flow
Controls the measured air flow to values depending on
the operating mode and air quality
Ventilation control 22y, air duct
pressure
Controls supply and extract air duct pressure to values
depending on the operating mode and air quality
Ventilation control 23y, fan
speed
Controls supply and extract fan speed to values
depending on the operating mode and air quality (default)
Temperature
control
STR_VIEW, 103
Supply air temperature control
21y
Controls supply air temperature to a value depending on
the outside air temperature modulating the available
actuators (default)
Temperature cascade control
21y
Controls room or extract air temperature to a value
depending on the outside air temperature modulating the
supply air temperature setpoint
Kitchen hood
ventilation
operation
STR_VIEW, 168
None
No kitchen extract fan available (default)
Active
Kitchen extract fan available (default)
Fireplace
ventilation
operation
STR_VIEW, 112
None
No open fireplace available
Active
Open fireplace available (default)
Dehumidification
control
STR_VIEW, 115
None
No humidity control available (default)
Active
Dehumidification control via fan speed and / or stand-
alone dehumidifier
Particulate matter
control
STR_VIEW, 324
None
No particulate matter control available (default)
Active
Particulate matter control available
Air quality control
STR_VIEW, 352
None
No air quality control available (default)
Active
Air quality control available
Configuration
Choosing the functions
4
A6V10733786_en_c
29 | 170
