4.5.2 Output settings
4.5.2.1 Controller board
The following functions can be selected for output signals on the controller board:
Outputs Q1, Q2, Q3
Parameter
BACnet object
Selection for Q1
Q1Sel, STR_VIEW,61
Selection for Q2
Q2Sel, STR_VIEW,62
Selection for Q3
Q3Sel, STR_VIEW,63
Selection
BACnet object
R/W
Signal type Range
None
-
-
-
Outside air damper command
DmpOaCmd
R/W
Relay
NO
Fire damper command
FdpCmd
R/W
Relay
NO
Preheating coil electric command
PreHclElCmd
R/W
Relay
NO
Preheating coil pump command
PreHclPuCmd
R/W
Relay
NO
Earth-to-air heat exchanger bypass damper
command
EaHxDmpbCmd
R/W
Relay
NO
Heat exchanger bypass damper command
HExgDmpBypCmd
R/W
Relay
NO
Electric heating coil command
HclElCmd
R/W
Relay
NO
Heating coil pump command
HclPuCmd
R/W
Relay
NO
Cooling coil pump command
CclPuCmd
R/W
Relay
NO
Cooling coil DX evaporator command
CclDxCmd
R/W
Relay
NO
Dehumidifier free-standing command
DhumFrsdCmd
R/W
Relay
NO
A-Alarm indication output
AalmIndOut
R/W
Relay
NO
B-Alarm indication output
BalmIndOut
R/W
Relay
NO
Common alarm indication output
CmnAlmIndOut
R/W
Relay
NO
Operation indication output
OpIndOut
R/W
Relay
NO
Heat exchanger bypass piston damper
Open*
HExgDmpBypCmdOp
BO,104 (Q1
R/W
Relay
NO
Heat exchanger bypass piston damper
Close*
HExgDmpBypCmdCls
BO,105 (Q2
R/W
Relay
NO
*Heat exchanger bypass piston damper Open / Close are co-dependent and
cannot be selected separately. For further details refer to chapter
Passive Heat Exchanger, controlled (PltHExg21y) [➙ 99].
Configuration
Configuring the hardware
4
44 | 170
A6V10733786_en_c
