Siemens 9410DC User Manual Download Page 86 | Manualshive

Page: 86 / 172

Siemens 9410DC User Manual Download Page 86

9410 series

Maintenance

1. Obtain the option module firmware (.SI9) files that you want to load onto your option

module(s). Save the files where they can be accessed by the computer running
ION Setup.

2. Start ION Setup.

3. Open the Setup Assistant for your meter.

4. Select the

Template

screen.

5. Click the

Firmware Upgrade

tab, then click

Upgrade

. Enter your meter’s password

(if prompted) and click

OK

.

6. Navigate to where you have stored the option module firmware. Select the Option

Module firmware file (*.SI9) as the file type.

7. Select the option module firmware (.SI9) file and click

Open

.

8. Enter your ION Setup password when prompted and click

OK

.

A dialog box describes the firmware upgrade progress, verifies the firmware, and
finishes with an overview stating whether the firmware was successfully uploaded.

Loading remote display firmware using ION Setup

This procedure is specific to the DIN meters with a remote display, and cannot be
performed on meters with an integrated display.

You can load updates to your meter’s remote display firmware using ION Setup over
an Ethernet connection.

You must have:

•

Your meter’s remote display firmware update (.BIN) file. You can download update
files from www.usa.siemens.com/pds.

•

The remote display connected to your meter.

•

FTP access to your meter from the computer running ION Setup.

NOTE:

If your meter’s remote display loses power during firmware upload, the display

will revert to its original firmware and you will have to reload the firmware file.

1. Obtain the remote display firmware (.BIN) that you want to load onto your display.

Save the files where they can be accessed by the computer running ION Setup.

2. Start ION Setup.

3. Open the Setup Assistant for your meter.

4. Select the Template screen.

5. Click the

Firmware Upgrade

tab, then click

Upgrade

. Enter your meter’s password

(if prompted) and click

OK

.

6. Navigate to where you have stored the remote display firmware. Select the remote

display firmware file (*.BIN) as the file type.

7. Select the remote display firmware (.BIN) file and click

Open

.

8. Enter your ION Setup password when prompted and click

OK

.

A dialog box describes the firmware upgrade progress, verifies the firmware, and
finishes with an overview stating whether the firmware was successfully uploaded.

Loading option module firmware using FTP

You can upload firmware to your meter’s option modules by loading the firmware
upgrade file onto your meter’s internal FTP site.

You must have:

86

7EN05-0336-01

«
...
84
85
86
87
88
...
»

Summary of Contents for 9410DC













































































































































































Reviews:

No comments