9410 series
Meter display
5. Press
to view
Volts L-N
, which also has additional screens and the ability to
view the information in a graphical format.
6. Press
again to view
Volts Unbalanced.
This is the last voltage screen, so
is grayed out and unavailable. Press
to return to
Volts L-N
, and press again to
return to
Volts L-L
.
Setup menu
Meter configuration can be performed through the display, using the meter’s webpages
or through software.
This section contains information on how to set up the meter using the display. You
must have your meter’s security settings configured to allow front panel (display)
programming in order to set up the meter using the display.
NOTE:
Your display may appear differently than shown, depending on your meter’s
power system and display settings.
NOTE:
Some setup parameters cannot be configured when revenue security is
enabled.
32
7EN05-0336-01