Installation | 7
115/174
500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH
NOTICE
Damage to the voltage transformer
The voltage transformer may touch the cable clamps or the cable bracket when it is pushed
on.
⇨ Push the voltage transformer carefully onto the transformer mounting plate.
⇨ Avoid touching the cable bracket or the cable clamps. If necessary, correct the position
of the cable bracket.
3. Push the voltage transformer
4
together with the transformer slide
8
carefully onto the
transformer mounting plate
5
. It must be easy to push the voltage transformer bushing
onto the centering bolt
7
.
Fig. 145:
Pushing the voltage transformer onto the centering bolt
Correcting the voltage transformer alignment
If the voltage transformer cannot be pushed onto the centering bolt, the voltage transformer
alignment on the transformer slide must be corrected.
1. Undo the 4 hexagon socket head bolts
9
at the voltage transformer
4
.
Fig. 146:
Correcting the voltage transformer alignment
2. Correcting the voltage transformer alignment. Push the voltage transformer again onto the
centering bolt.
3. Bolt the voltage transformer on.
Readjusting the transformer mounting plate
The position of the transformer mounting plate can be readjusted in order to establish the
correct position of the voltage transformer.
1. Undo the 2 hexagon head bolts
11
located inside.
Summary of Contents for 8DJH
Page 173: ......
