Siemens 8DJH Installation And Operating Instructions Manual Download Page 119

Page: 119 / 174

Installation | 7

119/174

500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH

CAUTION

Heavy instrument transformer

An instrument transformer falling down can cause injury.
⇨ Lift the instrument transformer together with several persons.
⇨ Secure the instrument transformer against falling down.

Removing the cover (option)

1. Detach the low-voltage plug connections

from the voltage transformers.

2. Remove the cap

3. Remove 2 bolts M8 from the voltage transformer cover (option).
4. Open the cover (right side), push backwards and remove from the side.

Fig. 152:

Removing the cover (right side, view from the rear)

Cover (right side)

Cover (left side)

Bolt M8 (2x)

5. Push the cover (left side) backwards and remove it upwards.

Fig. 153:

Removing the cover (left side, view from the rear)

Summary of Contents for 8DJH















































































































































































Search results

Summary of Contents for 8DJH

Reviews:

Related manuals for 8DJH

Brands by name

Popular brands

Siemens 8DJH, Installation And Operating Instructions Manual

Search results

Summary of Contents for 8DJH

Reviews:

Related manuals for 8DJH

Brands by name

Popular brands