Siemens 8DJH Installation And Operating Instructions Manual Download Page 141

Page: 141 / 174

Operation | 9

141/174

500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH

9.4.3 Switching the three-position switch-disconnector from OPEN to EARTHED

position

☒ Three-position switch-disconnector in OPEN position
1. Check service readiness [

▶

Page 135, "Ready-for-service

indicator"].

2. Verify safe isolation from supply of the feeder [

▶

Page 155,

"Verification of safe isolation from supply"].

3. Remove the padlock (optional) from the locking device.

4. Push the locking device downwards, and hold it.

✓ The actuating opening of the earthing switch is open.

5. Insert the operating lever and turn straight clockwise as far as it

will go.

✓ The position indicator of the earthing switch shows the

EARTHED position.

6. Remove the operating lever.

✓ The locking device returns to its initial position.

7. Fit the padlock (optional) on the locking device at the desired

position [

▶

Page 137, "Mechanical interlocking with padlock"].

✓

The feeder is earthed.

9.4.4 Switching the three-position switch-disconnector from EARTHED to OPEN

position

☒ Three-position switch-disconnector in EARTHED position
1. Check service readiness [

▶

Page 135, "Ready-for-service

indicator"].

2. Remove the padlock (optional) from the locking device.

3. Push the locking device downwards, and hold it.

✓ The actuating opening of the earthing switch is open.

Summary of Contents for 8DJH















































































































































































Search results

Summary of Contents for 8DJH

Reviews:

Related manuals for 8DJH

Brands by name

Popular brands

Siemens 8DJH, Installation And Operating Instructions Manual

Search results

Summary of Contents for 8DJH

Reviews:

Related manuals for 8DJH

Brands by name

Popular brands