Siemens 7ME3510, Operating Instructions Manual, Page: 81 / 214

Functions
7.1 Selecting Flow Units
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02
79
4. Scroll down to the [Totalizer Mode] menu and press the <Right Arrow> to select the
Totalizer Mode option list.
)ORZ7RWDO8QLWV
6LHPHQV 'XDO3DWK>@3DWK
&KRRVHSRVLWYHQHJDWLYHRUQHWWRWDO
)ORZ9RO8QLWV *DOORQV86
)ORZ7LPH8QLWV 0,1
)ORZ'LVS5DQJH $XWRUDQJH
)ORZ'LVS6FDOH *$/0,1
7RWDO9RO8QLWV *DOORQV86
7RWDOL]HU6FDOH .*$/
7RWDO5HVROXWLRQ 1(*)/2:
7RWDOL]HU0RGH !1(7)/2:
%DWFK6DPSOH7RW 326)/2:
5. Press the <Up/Down Arrows> to select the desired mode.
6. Press <ENTER> to store selection.
Totalizer Mode Controls
From the RS-232 serial port all of the Totalizer commands listed below can be executed
using PC keyboard function keys via VT100 terminal key emulation.
Note
Si-Ware or HyperTerminal should be in the Data Display mode when invoking the function
keys referenced in the table below. Use the key sequence <Ctrl L> to display the Data
Display mode.
Communications Setup
Connect the flow meter to your PC. Refer to Appendix A Site Setup for SITRANS F
(Page 145) , if needed.
1.
Access Si-Ware or, if using a PC, access HyperTerminal from the PC [Programs] menu,
then select [HyperTermina].
2. In [Connection Description] dialog box, enter a connection name (e.g. FUP1010). Click
[OK].
3. In [Phone Number] dialog box, select [Direct to COM 1 (or COM 2)]. Click [OK] to select.
4. In [Properties] dialog box, enter RS-232 parameters. Click [OK].
5. At terminal screen, click [File]. Select [Properties].
6. Select [Settings] tab. At [Emulation] box, select [VT-100].
7. Select [ASCII Setup]. In [ASCII Sending] uncheck boxes. In [ASCII Receiving] check
[Append line feeds to incoming line ends.]. Click [OK].