Siemens 7ME3510, Operating Instructions Manual, Page: 70 / 214

Commissioning
6.3 Empty Pipe Set
FUP1010 IP67 Portable
68
Operating Instructions, 03/2012, A5E02951522-02
Final Setup
1. Press <MENU> key once to display the main menu.
6HOHFW0HWHU7\SH
0HWHU7\SH !&KDQQHO)ORZ
0HWHU)DFLOLWLHV 'XDO3DWK)ORZ
/DQJXDJH &K)ORZ
&K)ORZ
7KLFNQHVV*DXJH
6LHPHQV&KDQQHO>@&KDQQHO
2. Press the <Right Arrow> twice.
3. Scroll down to [Install Complete]. Press the <Right Arrow> and select [Install]. Press
<ENTER>. The flow meter will go through its drives.
4. Observe the Measured Vs window and verify a correct sound velocity measurement (if
known).
5. Press the <Down Arrow> to accept sound velocity value.
6. The flow meter is ready to report flow. Press the <MENU> key again to display flow.
*0
%$7
)$8/7
63$&(
0$.83
6LHPHQV &KDQQHO>@ 8QLW
)/2:*$/0,1
727$/ *$/ 9V
14.35
354.6597
14.27
100.0
0.0
31.74
9IR
6.3 Empty Pipe Set
The flow meter performs the MTYmatic routine automatically during its Initial Make-up to
establish a standard setting for the Empty Pipe alarm. This process is normally sufficient for
setting this parameter. The [Empty Pipe Set] option list allows you to re-invoke MTYmatic,
use an Actual MTY routine (if application conditions allow you to empty and refill the pipe) or
use the Set Empty routine to set the empty pipe threshold by direct numeric entry.