Siemens 7ME3510, Operating Instructions Manual, Page: 103 / 214

Functions
7.10 RTD Calibration
FUP1010 IP67 Portable
Operating Instructions, 03/2012, A5E02951522-02
101
Table 7- 9 RTD Calibrate Menu Structure
RTD Calibrate RTD 1 Factory
User Cal
RTD 2 Factory
User Cal
RTD Calibration by Entry Data
The [RTD Calibrate] menu allows you to adjust the intrinsic RTD reading to match an
external reference thermometer by directly entering its reading. Only perform this procedure
while the RTD under test is installed and currently measuring temperature.
To enter the current RTD temperature:
1. From the [RTD Calibrate] menu press <Right Arrow> to access the RTD option list.
2. Press <Right Arrow> to highlight the RTD you want to calibrate (RTD 1 or RTD 2).
3. Move the highlight to [Factory] or [User Cal] then press <ENTER>.
57'&DOLEUDWH
6LHPHQV 'XDO3DWK>@3DWK
3LFN)DFWRU\RU8VHU&DOIRU57'
57' )DFWRU\
57' !8VHU&DO
4. This triggers the pop-up window:
57'&DOLEUDWH
6LHPHQV 'XDO3DWK>@3DWK
3LFN)DFWRU\RU8VHU&DOIRU57'
57' 8VHU&DO
57' 8VHU&DO
&DOLE#GHJ)