manualshive.com logo in svg

Side-Power SP 125 Ti, Installation And User Manual

The Side-Power SP 125 Ti thruster is a powerful and efficient marine propulsion system. To ensure easy installation and optimal user experience, make sure to download the Installation and User Manual for free at manualshive.com. This comprehensive manual provides step-by-step instructions and essential information for seamless operation of this exceptional product.

Share
Download
background image

2

SP 75 Ti / SP 95 Ti / SP 125 Ti

 

   

2.5.1- 2007

Inhalt

D

Hinweise zur Installation

Technische Daten .................................................................... 4

Planungs- & Vorsichtshinweise .............................................  6

Tunnelinstallation

Positionierung von Tunnel / Thruster ...................................  10

Formgebung der Tunnelenden ............................................  12

Optimaler Strömungsverlauf am Rumpf ..............................  14

Mögliche Tunnelinstallation in Segelbooten .......................  16

Tunnelinstallation bei Glasfiberrumpf ............................  18/20

Thrusterinstallation

Getriebe und Motorhalterung ................................................  22

Ölvorratsbehälter & Propeller ...............................................  24

Elektromotor ..........................................................................  26

Installation der Elektrik .........................................................  28

Steuerpanel und -kabel ........................................................  30

Schaltplan - Übersicht ..........................................................  32

Schaltplan - Technisch .........................................................  33

Checkliste zur Kontrolle der Installation ..............................  34

Bedienungsanleitung

Benutzerhinweise .................................................................  36

Benutzung von Sidepower Thrustern ...................................  38

Wartung & Service ................................................................  40

Fehlerbeseitigung ................................................................  43

Garantieerklärung

................................................................  48

Ersatzteileliste & -zeichnung

.........................................  50/52

Service Partner

...................................................................   56

KONFORMITÄTSERKLÄRUNG

Das von Sleipner Motor AS

P.O. Box 519
N-1612 Fredrikstad, Norwegen

gelieferte Produkt sowie die standard Bedienele-
mente erfüllen die Gesundheits- und  Sicherheits-
anforderungen entsprechend der Verordnung 89/
336/EEC vom 23 Mai 1989, Ergänzung 92/31/
EEC und 93/68/EEC.

Innhold

N

SAMSVARS ERKLÆRING

Sleipner Motor AS
Postboks 519
N-1612 Fredrikstad, Norge

Erklærer at dette produktet med tilhørende
standard kontrollsystemer er i samsvar med helse,
og sikkerhetskravene i henhold til Direktiv 89/
336/EEC FRA 23 Mai 89, korrigert av 92/31/
EEC og 93/68/EEC.

Installasjons instruksjoner

Tekniske spesifikasjoner ........................................................ 4

Planlegning og viktige forbehold ............................................. 7

Tunnel installasjon

Plassering av tunnel/thruster ................................................ 10

Utforming av tunnelåpninger ................................................. 12

Hvordan unngå turbulens rundt tunnelåpninger .................. 14

Forslag til tunnelinstallasjon på seilbåt ............................... 16

Tunnel installasjon i glassfiberbåter ............................... 18/20

Thruster installasjon

Gearhus og motorbraket ....................................................... 22

Oljebeholder og propeller ..................................................... 24

Elektromotor ........................................................................... 26

Elektrisk installasjon ............................................................. 28

Kontrollpanel og kontrollkabler ............................................. 30

Koblingsskjema elektrisk ...................................................... 32

Koblingsskjema ..................................................................... 33

Sjekkpunktliste for kontroll av installasjon ........................... 34

Brukermanual

Viktige forbehold .................................................................... 36

Hvordan operere Sidepower thrustere ................................. 38

Vedlikehold og servise ........................................................... 40

Problemer og løsninger ........................................................ 44

Garantierklæring

................................................................... 48

Reservedelsliste

.............................................................. 50/52

Servise sentere

....................................................................  56

Installation instructions

Technical specifications ...........................................................  4

Planning & important precautions ............................................  6

Tunnel installation

Positioning of the tunnel / thruster .........................................  10

How to shape the tunnel ends ................................................  12

How to prevent drag from tunnel installation ...........................  14

Possible tunnel installation in sailboats .................................  16

Tunnel installation in a GRP boat ......................................  18/20

Thruster installation

Gearhouse and motorbracket .................................................  22

Oil tank &  propeller ...............................................................  24

Electromotor ...........................................................................  26

Electrical installation ..............................................................  28

Control panel and control-leads ..............................................  30

Visual wiring diagram .............................................................  32

Technical wiring diagram ........................................................  33

Checklist for control of the installation ...................................  34

User's manual

Important user precautions ....................................................  36

How to use Sidepower thrusters ............................................  38

Maintenance & service ...........................................................  40

Troubleshooting ......................................................................  42

Warranty statement

.............................................................  48

Spareparts list & drawing

..............................................  50/52

Service centres

....................................................................  56

Contents

GB

DECLARATION OF CONFORMITY

We,

Sleipner Motor AS
P.O. Box 519
N-1612 Fredrikstad, Norway

declare that this product with accompanying
standard remote control systems complies with
the essential health and safety requirements
according to the Directive 89/336/EEC of 23
May 1989 amended by 92/31/EEC and
93/68/EEC.

Summary of Contents for SP 125 Ti

























































Reviews:

No comments

Related manuals for SP 125 Ti

Yamaha 50H Owner'S Manual preview
50H
Brand: Yamaha Pages: 232
Lantronix xPico 110 User Manual preview
xPico 110
Brand: Lantronix Pages: 17
MINN KOTA ENDURA C2 Owner'S Manual preview
ENDURA C2
Brand: MINN KOTA Pages: 14
ST STM32746G-EVAL User Manual preview
STM32746G-EVAL
Brand: ST Pages: 79
Gigabyte G1.Sniper B7 User Manual preview
G1.Sniper B7
Brand: Gigabyte Pages: 40
Gigabyte MSH87DI-SI User Manual preview
MSH87DI-SI
Brand: Gigabyte Pages: 51
Texas Instruments ADS8688EVM-PDK User Manual preview
ADS8688EVM-PDK
Brand: Texas Instruments Pages: 47
MSI Z270 Gaming Pro Carbon Motherboard User Manual preview
Z270 Gaming Pro Carbon Motherboard
Brand: MSI Pages: 92
Supero X9SPU-F User Manual preview
X9SPU-F
Brand: Supero Pages: 107
Supero H8QC8+ User Manual preview
H8QC8+
Brand: Supero Pages: 80
ECS GF7100PVT-M User Manual preview
GF7100PVT-M
Brand: ECS Pages: 66
ICP Wafer 5822 User Manual preview
Wafer 5822
Brand: ICP Pages: 50
Silicon Laboratories Si80xx-EVB User Manual preview
Si80xx-EVB
Brand: Silicon Laboratories Pages: 9
Gigabyte 686LX3 User Manual preview
686LX3
Brand: Gigabyte Pages: 20
AXIOMTEK SBC86620 Series User Manual preview
SBC86620 Series
Brand: AXIOMTEK Pages: 90
Watersnake FIERCE 2 54LB/48 Owner'S Manual preview
FIERCE 2 54LB/48
Brand: Watersnake Pages: 44
Watersnake Venom SXW 34/26 Owner'S Manual preview
Venom SXW 34/26
Brand: Watersnake Pages: 44
Watersnake ADVANCE SWS 70/36 Owner'S Manual preview
ADVANCE SWS 70/36
Brand: Watersnake Pages: 28

Brands by name

Popular brands

Load more brands