Operating Instructions
Chapter
6
CLX490
8009237/RB47/2007-08-03
©
SICK AG · Division Auto Ident · Germany · All rights reserved
6-15
Operation
4.
Ending the reading pulse.
The CLX displays the reading result in the output window of the terminal emulator.
The "Read Result" LED lights up for a duration of 100 ms (default setting).
shows two examples of the output of a reading result: Good Read and
No Read. The reading result comprises the data contents of the bar code(s) and the reading
explains the structure and function of the reading dia-
gnosis data for Good Read, and
for No Read.
Note
The CLX only outputs several bar codes in the reading result of the
host interface
if the
parameterized minimum and maximum number of bar codes is > 1, and several bar codes
have been presented to it. The number of bar codes to be read/output for each reading
interval can be selected in the C
ODE
C
ONFIGURATION
tab in the N
UMBER
OF
C
ODES
section.
The reading result of the
host interface
can also be displayed.
describes the procedure for this and the structure of the reading result
in the default setting.
Fig. 6-2:
CLV-Setup: Displaying the reading result of the auxiliary interface in the Terminal
Emulator
