Chapter
4
Operating Instructions
CLX490 Compact OMNI Scanner
4-2
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8009237/RB47/2007-08-03
Installation
4.2.4
Replacing the laser warning label
If necessary, replace the GB English/US English laser warning label with the required lan-
guage (
).
The device is delivered with a set of laser warnings in:
•
German/US English laser warning and
•
French/US English laser warning
See also
Chapter 2.3 General safety instructions and protection measures, Page 2-2
.
4.2.5
Selecting the mounting location
When you select the mounting location, the distance between the CLX and the host and
between the CLX and the bar code are important.
Distance between the CLX and the host
The CLX can be mounted at a maximum distance of 1,200 m from the host without a
connection to the SICK network or a bus. In practice, however, the distance depends on the
physical configuration of the host interface and the data transfer rate (see
Distance between the CLX and the AMV/S60 Connection Module
The AMV/S60 Connection Module should not be located further than 10 m from the CLX,
since the "CLV-Setup" program on the PC accesses the auxiliary interface (RS 232) of the
CLX via this module.
Fig. 4-1:
Replacing the laser warning labels
Supplied laser warnings:
