Operating Instructions
Chapter
6
CLX490
8009237/RB47/2007-08-03
©
SICK AG · Division Auto Ident · Germany · All rights reserved
6-7
Operation
Host Interface
This tab and other further dialog boxes are used to set the following:
•
Destination of the result data strings (host interface or CAN interface)
•
Active physical interface (RS 422/485 or RS 232)
•
Data format and transmission rate
•
Data transmission protocol
•
Start and stop characters of the interface protocol
Data Strings
This tab and other further dialog boxes are used to set the following:
•
Data output format of the host interface (telegram format)
•
Constants and reading diagnosis data in the "Header", "Code-Info/separator", "Splitter"
and "Terminator" blocks
•
Arrangement of the "Code-Info/separator" blocks in the data string
•
Output format for no reads and contents of the error string
•
Test string function (heartbeat)
•
Output sequence and sort criteria for reading more than one bar code per reading pulse
•
Format mask and its structure
•
Output format of an external data string forwarded as reading result
Auxiliary Interface
This tab is used to change the following:
•
Operating mode of the auxiliary interface
CAN Interface
This tab and other further dialog boxes are used to change the following:
•
CAN interface operating mode
•
Data transfer rate
•
Type of logical data connection of the connected CLX
•
Usage of the switch inputs/outputs of the CLX as CANopen Digital I/O
Extras
This tab is used to edit parameters that were not recognized by CLV-Setup after an upload.
Note
CLV-Setup Online Help contains a detailed description of the functions of the parameters and
their valid entries (see
Chapter 10.6.8 CLV-Setup Help, Page 10-22
for calling up Help).
