SICK Omni CLX490 Series, Operating Instructions Manual

Page: 114 / 158

Chapter 10 Operating Instructions
CLX490 Compact OMNI Scanner
10-10
©
SICK AG · Division Auto Ident · Germany · All rights reserved 8009237/RB47/2007-08-03
Appendix
Start with copy internal -> external
When it starts, the CLX loads the internal parameter set to its RAM. It then copies the
parameter set to the external memory and resets the start option to S
TART WITH
E
XTERNAL
P
ARAMETERS
.
The two "Device Ready" and "Read Result" LEDs blink alternately for approx. 10 s. The
"Device Ready" LED then lights up constantly.
The data is not lost when the device is switched off since it is stored permanently in the CLX
and is identical to the internal parameter set.
10.3.4 Switching on the device for the first time
Since the external parameter memory in the connector cover is empty (e. g. on delivery) af-
ter the CLV has started, the CLV copies its current parameter set to the external parameter
memory. Then the "Device Ready“ LED lights up. The CLX is ready for operation.
If an external parameter memory containing a corresponding parameter set is connected to
the CLX, the "Device Ready" LED blinks for 10 s when the device starts up correctly and
then lights up constantly .
10.3.5 Adjusting the parameter set in the external parameter memory after it has
been downloaded to the CLX
If the CLX is started with he S
TART WITH
E
XTERNAL
P
ARAMETERS
option with an external param-
eter memory and if the parameter set is downloaded from CLV-Setup to the CLX with the
permanent storage option, CLV-Setup asks you whether the new parameter set is also to
be copied to the external parameter memory ( Fig. 10-9 ). This function prevents the CLX
from reloading the old parameter set the next time it starts.
¾
Adjust the parameter set in the external parameter memory as described in
Chapter 6.4.1 Configuring the CLX with CLV-Setup, Page 6-4 .
Fig. 10-9: CLV-Setup: dialog box for adjusting the external parameter memory