Operating Instructions
Chapter
3
CLV 480 Bar Code Scanner
8 010 080/O824/10-02-2005
©
SICK AG · Division Auto Ident · Germany · All rights reserved
3-3
Product description
CLV with heater
The following are required to start up and operate the CLV 480 with heater:
1.
A SICK Connection Module from the
AMV 100
or
AMV 200
series to provide the power
supply and connect the data and function interfaces.
Available types:
– For connecting one CLV: AMV 100-011 (no. 6 021 105) for 24 V DC, max. IP 65
– For connecting two CLVs: AMV 200-011 (no. 6 021 106) for 24 V DC, max. IP 65
– or –
Alternatively, a non-SICK Power pack with a voltage output of 24 V DC +20 %/–10 %
to IEC 742 (functional extra-low voltage pursuant to IEC 364-4-41) and a minimum po-
wer output of
100 W
.
Cable no. 2 020 264 (3 m (9.84 ft)) with 15-pin D Sub HD connector and one open
end for connecting the CLV to the non-SICK Power pack (supply voltage).
2.
The following operating voltages/power output values:
– AMV 100-011: 24 V DC +20 %/–10 % (pursuant to IEC 364-4-41), min. 100 W
– AMV 200-011: 24 V DC +20 %/–10 % (pursuant to IEC 364-4-41), min. 200 W
3.
See
pos. 3
under CLV
without
heater
3.1.4
Product features and functions (overview)
High-performance laser scanner:
•
Line scanner (front-end reading window)
•
Scanner variant with oscillating mirror (side reading window)
•
Dynamic focus
•
Dynamic focus control with external or internal trigger
•
Reading range 260 to 2,050 mm (10.2 to 80.7 in)
(with oscillating mirror 220 to 1,950 mm (8.7 to 76.8 in))
•
Resolution 0.25 to 1.0 mm (9.8 to 39.4 mil)
(with oscillating mirror 0.3 to 1.0 mm (12 to 39.4 mil)
•
Scanning/decoding frequency 600 to 1,200 Hz
•
Variable active evaluation range of the scan line
Safety and user-friendly features:
•
Robust, compact metal housing, max. IP 65, CE certification
•
Laser class 2, laser diode switches off if reading interval is active for too long and if the
output power is exceeded
•
Automatic self-test on startup. Can also be triggered at any time
•
Diagnosis tools for installing and monitoring the system
•
Parameterized output of reading diagnosis data in reading mode
•
Operating data query, and error messages
•
Test string function for signaling readiness for operation
•
Future proof thanks to firmware update via serial interface (flash PROM)
•
Low power consumption, other voltage range
Easy operation/configuration:
•
With "CLV-Setup" PC software for Windows
•
Alternatively with simple command strings, also for use with special devices
