SYSTEM DESCRIPTION
3
47
8020776/12AX / 2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S |Free Flow Profiler
When mounting the device, make sure that the LMS Axle is aligned correctly on all three
axes.
You can tell whether the rotation of the 2D LiDAR sensor is correct by considering the top,
side, and front views.
•
Rotation about the Y-axis
: The signal must be output at an angle of 90° in relation to
the
direction of travel
. The system tolerates a rotational error of ± 2° about the Y-axis.
Fig. 43: AxleDetector project planning – Rotation of the LMS Axle about the Y-axis
•
Rotation about the X-axis
: The signal must be output at an angle of 90° in relation to
the
road surface
. The system tolerates a rotational error of ± 2° about the X-axis.
Fig. 44: AxleDetector project planning – Rotation of the LMS Axle about the X-axis
•
Rotation about the Z-axis
: The device’s rear panel must be perpendicular to the road
surface. The system tolerates a rotational error of ± 2° about the Z-axis.
Fig. 45: AxleDetector project planning – Rotation of the LMS Axle about the Z-axis
Rotation
