![background image](http://html1.mh-extra.com/html/sick/1088784/1088784_operating-instructions-manual_1264409122.webp)
6
COMMISSIONING
122
8020776/12AX / 2019-05-31|SICK
O P E R A T I N G I N S T R U C T I O N S | Free Flow Profiler
Subject to change without notice
3. Click the
Start Update
button. You will see a message indicating that a maintenance
process is about to be started on the TEMS Recorder.
4. Click
Continue
. The TEMS Recorder update is installed on the Traffic Controller. This
process may take a little while.
5. You will receive a notification once the process has finished.
6. To complete the operation, confirm the message by clicking
OK
.
6.11.3
Updating packages
Additional system components, plug-ins, and configuration files (e.g., Vehicle Classifier)
are supplied as separate files in the
temsPackage
file format. Once again, they are
installed via TEMS Manager.
The procedure is very similar to the one for TEMS Recorder updates.
The configuration that is currently running has to be stopped for this.
1. Save the temsPackage file in a directory of your choice on the customer network.
2. Go to the
Setup
workspace and click
Update Packages
.
3. Select the temsPackage file. First of all, the file is uploaded to the Traffic Controller
FPS. After that, installation commences.
4. Install any additional temsPackage files (where applicable) using the same process as
described above.
Note