![background image](http://html1.mh-extra.com/html/sick/1088784/1088784_operating-instructions-manual_1264409011.webp)
ON SAFETY
2
11
8020776/12AX / 2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S |Free Flow Profiler
System function for classifying vehicles
The
Vehicle Classifier
system function sorts vehicles into up to 30 vehicle classes using
predefined category systems. The vehicle class can be output based on the 3D
measurement results for the vehicle.
System function for automatically counting axles
The
Axle Detector
system function can be used to determine the number of axles and
their positions.
Data output
All the data recorded by the individual system functions are made available via a TCP/IP
interface (TEMS Info interface).
2.3
Intended use
The profiling system may only be used as described in section
2.2 Applications of the
system
. It may only be used by qualified personnel in the environment in which it was
mounted and initially commissioned by qualified safety personnel in accordance with
these operating instructions.
The profiling system is not a safety device for human protection and it therefore does not
comply with any safety standards.
It is purely a measurement system without any safety functions and must only be used
in this capacity.
Consequently, any responsibility on the part of SICK is restricted to these defined and
limited properties of the measurement system.
If used in any other way or if alterations are made to the profiling system – including in
the context of mounting and installation – this will render void any warranty claims
directed to SICK AG.
Notes
Note