![background image](http://html1.mh-extra.com/html/sick/1088784/1088784_operating-instructions-manual_1264409144.webp)
7
MAINTENANCE
144
8020776/12AX / 2019-05-31|SICK
O P E R A T I N G I N S T R U C T I O N S | Free Flow Profiler
Subject to change without notice
4. Click the IP address and adjust it as appropriate.
5. Click
Assign Device
. The replacement device is assigned to the
LMS Width1
system
function.
6. Once the change has been made, click
Close
in the device search.
Loading the site configuration
▸
Click the
Load site configuration
icon.
Once the loading process is complete, all of the system functions and system components
should be green.
This means that the profiling system is ready for operation again.
7.3.4.2
Updating the configuration after replacing the Traffic Controller FPS
If only the Traffic Controller FPS has been replaced, the first thing you have to do is
establish a connection with the new TEMS Recorder.
You can then upload a site configuration to the new TEMS Recorder from a site
configuration file using TEMS Manager.
Changing the IP address of the Traffic Controller FPS
Upon delivery, the default IP address for the replacement device is 192.168.10.200.
Before you can establish a connection with the Traffic Controller FPS, you have to change
the IP address.
This procedure is described in detail in
6.3 Configuring the IP address of the Traffic
Establishing a connection with the TEMS Recorder
1. Connect to TEMS Manager.
2. In TEMS Manager, log in as a user with the
Authorized User
authorization or higher.