![background image](http://html1.mh-extra.com/html/sick/1088784/1088784_operating-instructions-manual_1264409023.webp)
SYSTEM DESCRIPTION
3
23
8020776/12AX / 2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S |Free Flow Profiler
3.1.2.2
Layouts for the axle counting function
The
LMS Axle
system component for counting axles is mounted at the side of the lane.
This mounting position ensures that the side of the vehicle is captured.
As well as incorporating the
LMS Axle
system component, this 2D LiDAR sensor is usually
responsible for the
LMS Width
system component as well (shared function).
Fig. 7: Layouts – Axle counting for a single lane with 3 x 2D LiDAR sensors
The following example shows the layout for the axle counting function above two lanes
with a total of five 2D LiDAR sensors.
Fig. 8: Layouts – Axle counting for two lanes with 5 x 2D LiDAR sensors