3
SYSTEM DESCRIPTION
48
8020776/12AX / 2019-05-31|SICK
O P E R A T I N G I N S T R U C T I O N S | Free Flow Profiler
Subject to change without notice
3.6
Status indicators
3.6.1
Status indicators for the 2D LiDAR sensors
The LEDs (1) signal the operational status of the 2D LiDAR sensor.
In addition, the 7-segment display (2) is also available for diagnostics when errors or
faults occur (see chapter
8.2.1 Fault indicator for the 2D LiDAR sensors
Above the inspection window you will find a key that explains the meaning of the status
indicators (3).
Fig. 46: Status indicators – 2D LiDAR sensors
Display
Meaning
2D LiDAR sensor in operation, no evaluation cases are reporting an event
2D LiDAR sensor in operation, at least one evaluation case reports an event
Optics cover is dirty
Switching output switched
2D LiDAR sensor in teach-in mode
Tab. 4: Status indicators –2D LiDAR sensors
3.6.2
Status indicators and controls on the Traffic Controller FPS
On the front of the Traffic Controller FPS, you will find the following status indicators and
controls:
Fig. 47: Status indicators – Traffic Controller FPS
No.
Meaning
1
Status LED: Lights up green when device is ready for operation
2
Power ON/OFF
3
Reset
4
HDD LED: Lights up green when the hard drive is being accessed
Tab. 5: Status indicators – Traffic Controller FPS
