pg.
18
Add the final set of legs
Slide the last remaining upper support into place, then move the last two legs from the outside to the inside of the
table sides. Just like with the other legs, bolt the gussets and upper support to the leg, followed by the lower
support. Your table should now look like this:
Before moving on to the next step, check to make sure that you don’t have any leftover cross-supports or gussets.
We have included extra pieces of all your table hardware, so don’t be too concerned if you have a few extra nuts
and bolts left over.
Assemble Your Shopbot PRS Gantry Tool 2015 02 27.Docx
© 2015 ShopBot Tools, Inc.
