pg.
19
Level and square the table frame
Level and square the front table side
From this point on, we will refer to the table sides as
front and rear
. The
front side
of the table will
be closest to the 0,0 point as indicated on your table drawing. Using the longest level you have (6 or
8 feet is ideal), set the level on the front table side and adjust the leg levelers until this table side is
level. Do the main adjustments with the end legs, as the middle leg is primarily just there for support.
After those are level make sure that the center leg properly supports the beam and does not cause
the table side to bow or sag.
Assemble Your Shopbot PRS Gantry Tool 2015 02 27.Docx
© 2015 ShopBot Tools, Inc.
