pg.
21
Level the rear table side
Level the rear table side by checking it against the front. Place the level so that it spans the two table
sides at one end, then adjust the leveling feet on the back table side. Once this is level, move down to
the next set of legs.
TIP:
When checking a long span, a longer level will give
a more accurate reading. We recommend using a level
that spans the entire width of your table.
If this is not possible, you can still place a shorter level
on top of a straightedge. Whatever you use for the
straightedge, make sure that it is actually straight with
parallel sides.
Assemble Your Shopbot PRS Gantry Tool 2015 02 27.Docx
© 2015 ShopBot Tools, Inc.
