pg.
36
Determining the VFD Model
There are two main types of VFD’s, a 10”
model and a 16” model. These can be
differentiated by their size and model
numbers. Model numbers are found on
the front of the VFD underneath the
“RUN” and “STOP” buttons as shown to
the left.
There are five different amperage configurations that could’ve been shipped with your tool. These
will not impact installation, but could be information that tech support may need, so it is included.
An example model number is shown to the
left. The model number is
CIMR–VU
2
A00
40
GAA.
The first bolded and underlined number is the voltage.
2 = 200-240 Vac, 3-phase
4 = 380-480 Vac, 3-phase
This model is a 200V model. This information will not change your mounting procedure.
The second bolded and underlined section refers to the amperage. This is the part that will
determine the sizing of your VFD.
10” VFD Models = 09, 12, and 20
16” VFD models = 30 and 40
In our example this is a 40A VFD (determined from the 40 in the model number) which is a 16”
model. For installing this size model you would skip to section titled “Mounting the 16” VFD”. The
10” VFD will be covered in the next section.
Model #
Amperage (Determines size)
Voltage
Assemble Your Shopbot PRS Gantry Tool 2015 02 27.Docx
© 2015 ShopBot Tools, Inc.
