Shimadzu 503-61000-01, Installation Manual, Page: 88 / 208

Chapter 4 Installation
Mobile DaRt Installation Manual 4-54
4.34
Charging the Battery after installation
In order to make the battery stable after installation, charge the battery after
using it as much as the red LED of the battery indicator comes on. Instruct users
of the unit to repeat three times the cycle of charging and discharging the battery.
(Refer to "4.8 Charging the Battery" in the Operation manual.)
4.35
Installing an apron hanger
Do when the user wants to change the position where the apron hanger is
installed.
Installation procedure of apron hanger
1.
Remove the screw two places of the upper surface of top cover, and
remove the top cover.
2.
Remove the screw which installs the apron hanger, and install the apron
hanger in the arbitrary position shown in Fig. 4-82.
Fig. 4-82 Apron hanger
4.36
Assembler Test
In USA, execute the assembler test according to the attached
ASSEMBLER TEST MANUAL (Document No.M503-E318).
Apron hanger
Position where apron
hanger can be installed
Top cover