Shimadzu 503-61000-01, Installation Manual, Page: 131 / 208

B.10 Display and Reset of Battery Charge Counter
Mobile DaRt Installation Manual B-xix
B.10
Display and Reset of Battery Charge Counter
It is possible to display and reset the number of charging times counted by the
software.
Procedures of displaying the Battery charge counter
1.
Set the charging counter mode.
Set the DIP switch NEXSC SW3-8 to ON and turn ON power. Then, enter
the charging counter display mode by pressing the obese body key and
APR waist exposure key. (LEDs of the waist exposure key and the obese
body key blink.)
2.
Check the cumulative number of charging times.
The number of charging times is displayed on the set tube voltage display
and the tube current time product display.
The maximum number of the cumulative counter display is 32767. If this
number is exceeded, the display is reset to 0.
Fig. 17 An example of the charging counter display (the number of charging times is 176)
Resetting the charging counter
1.
Resetting cumulative number of charging times
Press the program registration key for about 3 seconds. Then, the
cumulative number of times is reset to “0”.