Shimadzu 503-61000-01, Installation Manual, Page: 128 / 208

Appendix B Adjustment Mode
Mobile DaRt Installation Manual B-xvi
B.8
Display and Reset of Cumulated Mileage.
It is possible to display and reset the cumulated mileage that is controlled by
software.
Procedures of displaying and resetting the cumulated mileage:
1.
Setting cumulated mileage display mode
Set DIP switch NEXSC SW3-8 ON and turn on power. Then, enter the
cumulative mileage display mode by pressing the Chest key of APR.
(The LED of the Chest key blinks.)
2.
Checking cumulative mileage
The total cumulative mileage appears on the set tube voltage display,
and the relative cumulative mileage appears on the display for the
product of tube current and its flow time. The total cumulated mileage is
the cumulative mileage since the unit was shipped from the factory. The
relative cumulative mileage is the cumulative mileage after the last reset
of the mileage.
A max. number of cumulative mileage is 999999 km. Over the counter’s
max. number then, the cumulative mileage is reset, and the display is
turned to "0".
3.
Resetting relative cumulative mileage
Press the program registration key for about 3 seconds. Then, the
relative cumulative mileage is reset and the display is turned to "0".