Shimadzu 503-61000-01, Installation Manual, Page: 53 / 208

4.7 Setup of CXDI Generator Communication S/W
Mobile DaRt Installation Manual 4-19
4.7
Setup of CXDI Generator Communication S/W
It is necessary to change the setting of the CXDI by installing CXDI
Generator Communication S/W. As follows the procedures.
After the S/W is installed, it is necessary to change the following
settings of CXDI.
1.
【
SYSTEM
】
is pressed on the screen where CXDI-50G started.
Fig. 4-25
2.
"System menu" screen is displayed.
【
SETUP MENU
】
is pressed.
Fig. 4-26