Shimadzu 503-61000-01, Installation Manual, Page: 188 / 208

Appendix E Maintenance and Inspection
Mobile DaRt Installation Manual
E-xxx
iv
5.
Reference Material
×× 0 × × 00000000 ×××× ×××× ×××× ×××× ×××× 00 ××××
(1) (2) (3) (4) (5) (6) (7) (8) (9)
(1) X-ray unit manufacturer/model code set in CXDI
Fixed as “01.”
(2) Tube codes set in CXDI
Technique and tube codes need to be set on CXDI.
Set the tube code for CXDI at “0” (tube 1) when connecting with MUX.
(3) Technique codes set in CXDI
Technique and tube codes need to be set on CXDI.
Set the technique code for CXDI at “2” (bucky 1) when connecting with
MUX.
(4) Tube voltage
(5) Tube current
Tube voltage and tube current do not need to be set on CXDI when
connecting with MUX. With the unit, exposure condition transmitted from
CXDI to MUX is notified with an APR number.
(6) Exposure time
Exposure time does not need to be set on CXDI when connecting with MUX.
With the unit, exposure condition transmitted from CXDI to MUX is notified
with an APR number.
(7) APR numbers
APR numbers are recorded in MUX and correspond to CXDI protocols.
With the unit, exposure condition transmitted from CXDI to MUX is notified
with an APR number. “0001” – “0072”
(8) Relationship between CXDI phototimer-related setting and MUX
When connecting with MUX, specify the phototimer-related setting on CXDI
at “0000” (phototimer is not used).
(9) CXDI focus code
When connecting with MUX, set the CXDI focus code at “1000” (large
focus).