Shimadzu 503-61000-01, Installation Manual, Page: 38 / 208

Chapter 4 Installation
Mobile DaRt Installation Manual 4-4
4.2
Installation Procedures
Install the unit according to the flowchart below.
*1 : This work is not needed if it was finished in preinstallation.
Checking Performance of Each Part
(Refer to 4.31)
Initial setting
(Refer to 4.32)
Attaching screw caps
(Refer to 4.33)
Installing an apron hanger
(Refer to 4.35)
Assembler Test
(Refer to 4.36)
End
Explanation of MUX-100D operation to customer
Charging the Battery after installation
(Refer to 4.34)
Clinical application
Installing the arm cover
(Refer to 4.27)
Attaching of a knob for locking collimator rotation
(Refer to 4.28)
Setting of XCONT
(Refer to 4.30)
Changing According to the Power Supply
(Refer to 4.29)
Installing options
(Refer to Chapter 5)
Adjustment of Image quality
(Refer to 4.26)
Start
Assemble for the CXDI-50G
(Refer to 4.3)
Check of CXDI Generator Communication S/W
(Refer to 4.8)
Check of MLT-M S/W (optional)
(Refer to 4.11)
Calibration
(Refer to 4.12)
Selftest
(Refer to 4.13)
Setup of DMW-PS (optional)
(Refer to 4.15)
Setup of annotation
(Refer to 4.17)
Setup of DICOM storage and print
(Refer to 4.18)
Check of REX value
(Refer to 4.20)
Acquisition of image with phantom
(Refer to 4.19)
Check of DICOM storage and print function
(Refer to 4.21)
Check of image
(Refer to 4.22)
Check of DMW-PS function (optional)
(Refer to 4.16)
Installation of DMW-PS (optional)
(Refer to 4.14)
Installation of MLT-M S/W (optional)
(Refer to 4.10)
*1
*1
*1