Shimadzu 503-61000-01, Installation Manual, Page: 48 / 208

Chapter 4 Installation
Mobile DaRt Installation Manual 4-14
8.
"A/D Board Serial Number for Sensor ID#1" is displayed. The serial number
("
*
" part of 0x
*******
) written in the line on one step is input, and the
【
Enter
】
key is pressed.
Fig. 4-17
9.
The
【
Enter
】
key is pressed until the menu of "CCR SETUP MENU(Esc to
go back)" is displayed. Check the display, the
【
Esc
】
key is pressed.
Fig. 4-18
Input the same value
referring to the serial
number in upper line.
Press the
【
Esc
】
key.