Shimadzu 503-61000-01, Installation Manual, Page: 164 / 208

Appendix E Maintenance and Inspection
Mobile DaRt Installation Manual
E-x
Greasing Part [A] of the X-ray tube section
The detailed drawing of Part [A] of Fig. 4 is shown in Fig. 5.
Greasing steps
1.
Unscrew M4 flat countersunk head screw (a) and remove cover A.
2.
Unscrew locking screw (b), and make plunger (c) loose.
3.
Unscrew two M3 flat countersunk head screws (d), and remove cover C.
4.
Unscrew four M6 hexagon socket head cap screws (e), and remove
bearing A.
5.
Grease part
①
.
6.
Bearing A and X-ray tube are separated each other by unscrewing four M6
hexagon socket head cap screws (f).
Fig. 5 Detail of Part A
1
ジクA
プランジャ
止めネジ
カバーA
カバーC
(a)
(b)
(c)
(d)
ジクウケA
(e)
(f)
(a)
Plunger (c)
Locking
screw (b)
Axis A
Cover C
Cover A
Bearing A