CHAPTER 1. OUTLINE OF THE PRODUCT
PN-T321/T322B
OUTLINE OF THE PRODUCT
1 – 2
*
1
Uses the provided conversion cable (for AV video).
*
2
Uses the provided conversion cable (for AV component).
*
3
Temperature condition may change when using the display together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*
4
D-SUB input (factory default setting)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
1 - 2. DIMENSIONAL DRAWINGS
*
Note that the values shown are approximate values.
*
1
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10mm). Loose mounting may cause the product to fall, resulting in serious personal inju-
ries as well as damage to the product. The screw and hole should come together with over 5/16 inch (8mm) length of thread. Use a bracket
which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.
18-13/16 [478]
30-1/4 [769]
7-7/8 [200]
7-7/8 [200]
Unit: inch [mm]
VESA holes
*
1
Opening width (27-5/8 [701])
18-1/8 [461]
Opening height
(15-
9
/16 [3
9
6])
1-1/2
[38]
2-7/16
[62]
1-15/16
[49.1]
1
[25.3]
PN-T322B
PN-T321
