CHAPTER 5. SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES
PN-T321/T322B
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES
5 – 4
7. SERIAL NUMBER WRITING PROCEDURES
7 - 1. OPERATING CONDITIONS OF THE
SERIAL NUMBER SETTING TOOL
The operating conditions of the serial number setting tool of the infor-
mation display are as follows.
■
WHEN CONNECTED TO THE INFORMATION
DISPLAY WITH AN RS-232C CABLE
The required RS-232C cable is as shown below. Connect the PC’s
COM port and the RS-232C input terminal of the display with the cable.
7
-
2.
START-UP OF THE SERIAL NUM-
BER SETTING TOOL
Press [Serial Number] button of the Service Tool Launcher.
7 - 3. SERIAL NUMBER SETTING PRO-
CEDURES
The procedures of setting serial numbers with use of the Serial Number
Setting Tool are as follows.
1 ) Press [Connection Setting...] button to configure the communica-
tion settings.
2 ) Input the serial number you need to set in the field of Write Data.
3 ) Press [Write] button.
4 ) Press [Read] button, and confirm that the set serial number is dis-
played in the Read Data field.
7 - 4.
SERIAL NUMBER CHECK METHOD
Press [Display] button on the remote controller to indicate the display
information, and check the serial number.
OS
n
Windows XP
n
Windows Vista
n
Windows 7
Communication
port
n
RS-232C port recognized as a COM port
(Which can be communicate in 9600bps.)
RS-232C cable
Straight cable (D-SUB 9pin female - female)
