SEW MOVIFIT SC series, Operating Instructions Manual

Page: 74 / 148

6
Electrical Installation
HanModular® ABOX "MTA...-H12.-...-00" and "MTA...-H22.-...-00"
74
Operating Instructions – MOVIFIT
®
SC
6.5.8 Assignment of M23 expansion plug connector X19 (alternative for standard I/Os)
The following figure depicts the M23 expansion plug connector (female) (alternative for
standard I/Os):
NOTES
The M23 expansion plug connector can only be used with the following function levels:
• "Technology" or "System" with PROFIBUS, DeviceNet or PROFINET
• "Classic" with PROFINET
60568AXX
No. Pin Name Function
X19 1 DI01 Binary input DI01 (switching signal)
2 DI03 Binary input DI03 (switching signal)
3 DI05 Binary input DI05 (switching signal)
4 DI07 Binary input DI07 (switching signal)
5 DI09 Binary input DI09 (switching signal)
6 DI11 Binary input DI11 (switching signal)
7 DI13/DO01 Binary input DI13 or binary output DO01 (switching signal)
1)
1) Important: The reference potential is 0V24_S. When you use the inputs DI13 and DI15 or the outputs
DO01 and DO03 via the X19 expansion connector, the reference potentials 0V24_C and 0V24_S must be
connected with each other (e.g. via terminal X29).
8 DI15/DO03 Binary input DI15 or binary output DO03 (switching signal)
1)
9 0V24_C 0V24 reference potential for sensors
10 0V24_C 0V24 reference potential for sensors
11 V024-III +24V sensor supply group III, from +24V_C
12 FE Functional ground
9
1
2 7
6
5
11
12
3
4
8
10