manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 88

Symphony Client

Add an alarm

You can add a manual alarm to a camera in the Symphony Client.
You can use manual alarms to activate the action set associated with the manual rule.
1.

In the client interface, open the camera to which you want to add an alarm in a camera view

panel.

2.

Hover over the camera view panel containing the camera to which you want to add an alarm

and click the 

Alarm

 icon.

Add an alarm indicator

You can display an alarm indicator around a camera view panel. The alarm indicator flashes for a

specific time or until you acknowledge the alarm.

1.

In the client interface, click 

View

 > 

Settings

.

2.

Click the 

Alarms

 tab.

3.

Select 

Flash panel on alarm

.

4.

In the 

Number of seconds to flash alarm

 field, type how long the camera view panel flashes

when the camera records an alarm.

5.

Click 

OK

.

Configure a camera view panel

1.

In the client interface, right-click a camera view panel.

2.

Click 

Settings

.

3.

Configure the settings for the camera view panel.

4.

To apply the settings to all of the camera view panels, click 

Other

 > 

Apply To All

.

5.

Click 

Apply

.

6.

Click 

OK

.

Senstar Symphony User Guide

88

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands