Symphony Server
4.
Click
Save
.
Add a camera to a device group
You can add a camera to a device group in the device tree.
Before you begin, make sure that you have created device groups for the device tree.
The camera appears as part of the group in the device tree in the Symphony Client.
1.
In the server configuration interface, click
Devices
>
Cameras
.
2.
Select a camera and click
Edit
.
3.
In the
Groups
section, select a groups or groups to which you want to add the camera.
4.
Click
Save
.
Related tasks
on page 20
Configure digital input and output
You can configure how digital inputs and outputs appear in the client interface.
1.
In the server configuration interface, click
Devices
>
Cameras
.
2.
Select a camera and click
Edit
.
3.
In the
Digital I/O
section, perform the following tasks:
a) To enable the input or output, select
In Use
.
b) To set the name that appears in the client interface, type a name in the
Output Name
or
Input Name
field.
c) In the
Activate
field, type the text that appears in the client interface when clicking on the
input or output activates it.
d) In the
Deactivate
field, type the text that appears in the client interface when clicking on
the input or output deactivates it.
e) In the
Auto Deactivate
field, set the time (in milliseconds) after which the input or output
automatically deactivates.
f)
In the
Camera Shortcut
list, select the camera on which the input or output controls
appear.
Buttons that allow you to control the input or output appear in the camera view panel for
the camera that you select.
4.
Click
Save
.
Templates
A template is a collection of configuration settings that you can apply to cameras.
If you apply a template to a camera, some of the configuration settings for the camera are restricted.
For example, you cannot add an additional stream to a camera if you apply a template to a camera.
Template settings
General
Setting
Description
Failover enabled
Select and specify whether failover is enabled or disabled.
Senstar Symphony User Guide
17
